問題解惑：MPI Application rank 0 exited before MPI_Finalize() with status 2

2016-09-23 by:CAE仿真在線來源:互聯網

這種問題是fluent多線程問題,一旦出現這種問題整個fluent就死掉了,所有的數據都無法保存,問題很嚴重。

但是問題一般情況不是多線程本身的問題,而是因?yàn)榫€程里面運行的計算過程出現了問題。

1、MPI_Finalize() with status 2 原因之一:出現負體積

只要出現負體積,線程的計算就無法進行下去了,這時候線程要拋出異常終止

Error at Node 3: Update-Dynamic-Mesh failed. Negative cell volume detected.

WARNING: 2 cells with non-positive volume detected.MPI Application rank 0 exited before MPI_Finalize() with status 2

2、MPI_Finalize() with status 2 原因之二:任何原因出現發散或速度或移動推進速度過快的情況,如Courant數超大

112 more time steps

Updating solution at time level N...
Global Courant Number [Explicit VOF Criteria] : 471.06

Error at Node 0: Global courant number is greater than 250.00 The
velocity field is probably diverging. Please check the solution
and reduce the time-step if necessary.

Error at Node 1: Global courant number is greater than 250.00 The
velocity field is probably diverging. Please check the solution
and reduce the time-step if necessary.

Error at Node 2: Global courant number is greater than 250.00 The
velocity field is probably diverging. Please check the solution
and reduce the time-step if necessary.

Error at Node 3: Global courant number is greater than 250.00 The
velocity field is probably diverging. Please check the solution
and reduce the time-step if necessary.
MPI Application rank 0 exited before MPI_Finalize() with status 2

===============Message from the Cortex Process================================

Fatal error in one of the compute processes.

==============================================================================

Error: Cortex received a fatal signal (unrecognized signal).
Error Object: ()

Error: There is no active application.
Error Object: (case-modified?)

Error: No journal response to dialog box message:'There is no active application.'
. Internally, cancelled the dialog.

Error: There is no active application.
Error Object: (rp-var-value 'physical-time-step)

Error: There is no active application.
Error Object: (rp-var-value 'delta-time-sampled)

3、MPI_Finalize() with status 2 原因之三:內存過度緊張,多線程中只要任何一個線程無法分配到足夠的內存,就會終止

一般情況下,MPI_Finalize() with status 出現之前會有錯誤信息,如上面e文所示,但是有些情況是沒有的

如下圖所示

上面的計算是在進行一次正常的動網格重構完成后,進入下一次迭代求解計算的時候,直接出現了問題。

筆者檢查機器此時內存占用已經達到92%的水平,為了進一步驗證這個猜測,本人馬上用一個可以正常計算的case,在內存90%以上的情況下進行計算

開始可以計算一步,第二部就直接MPI_Finalize() with status 2

fluent多線程mpi異常退出問題,還有多種不同的status,如-1最多,其實只有兩種類型的錯誤,一種是腳本錯誤,一種是物理模型數據錯誤

前者如 journal file 腳本 udf腳本,這些錯誤一般會導致-1或其他-值,后者就是發散、超指標等導致異常物理指標的情況終止。

情況很多,各位要具體問題具體分析,先看出現問題之前的log,如果有l(wèi)og這就是問題根源,如果沒有l(wèi)og提示,很可能就是內存問題

還有一種情況是在多線程計算中其實內部不同線程一直在持續通訊,如果計算過程網絡環境變化,直接就回出問題,下圖是計算過程通訊圖,如果網絡改變了,比如ip或網卡屬性變化,在計算期間是不允許的。